+1 639 638 9919
EN | FR
Proudly Canadian

Your Cart

Home Use cases Cellular Air Quality Monitor
Use case

Track indoor air quality, CO2 and VOCs at a property nobody is in, with no WiFi needed. You get a text and an email when the air crosses a limit you set.

No WiFi needed

Proudly Canadian

The CabinPulse device, its status light lit

Key features

Closed up for a season, the air goes stale.

CO2 builds in a sealed building and VOCs come off furnishings and finishes. Neither is visible until you open the door. CabinPulse tracks both, so you know what you are walking into before you arrive.

The underside of CabinPulse showing its wall mount fitting

One air quality score

CO2 and VOC readings are combined into a single indoor air quality score, so you can tell at a glance whether the air is fine.

VOCs and CO2

Tracks volatile organic compounds from cleaning products, paint and building materials, and the CO2 that builds up in a closed room.

Wildfire smoke

Smoke that gets into a closed building pushes the VOC reading up, so you can see the air has turned before you arrive.

Alerts at your limits

Set the air quality level that matters to you. You get a text and an email when a reading crosses it.

Cellular included

No WiFi or internet needed at the property. Cellular is included on every plan. Check your area on the coverage page.

History and trends

Readings every 15 minutes, charted by hour, day or month, so you can spot ventilation problems and where bad air comes from.

Every sensor you need to make sure your property is protected is built right into CabinPulse — nothing to add, wire or install.

Switch CabinPulse on, connect it to power, and monitoring starts instantly.

NewEnable Low Power Mode, and CabinPulse can last up to 24 months without a charge while still sending a daily data update and alerting you to temperature and power changes within a couple of minutes. How it works

Temperature

Get a text as soon as the temperature drops toward freezing, in time to do something before a pipe bursts.

Power

Know the moment the power goes out. It is usually the first sign that something else is about to go wrong.

Humidity

Damp builds into mould and mildew over a season. Catch it while it is still a small job.

Air quality

Tracks CO2, VOCs and overall air quality, so you know when the air has gone bad in a closed-up building.

No WiFi needed.

Cellular is included and unlimited, on all major networks worldwide. Your property needs no internet at all.

It keeps working in a power outage.

Smart thermostats and WiFi sensors go down with the router. CabinPulse has its own connection via cellular, and its backup battery lasts three to four days.

The CabinPulse dashboard showing current temperature, humidity, air quality, pressure and power status, with history charts
Your property's readings and history, in the browser or on your phone.

Check in, anytime.

Every reading is saved, so you can check the full history any time from your phone or computer.

  • Monitor air quality without WiFi
  • See VOCs from new finishes and furnishings
  • Track the air quality score over time
  • Get alerts during wildfire season
  • Spot ventilation problems
  • Know the air is fine before you arrive

Alerts by text message and email

While you can always check in on the dashboard app, you don't need to. Once your alerts are set up, CabinPulse messages you when something goes wrong.

MESSAGES 14m ago

CabinPulse

Inside temperature 4.1°C and still falling. Power is on.

MAIL 14m ago

Temperature alert — Emma Lake

Now 4.1°C, below your 5°C threshold. Tap to see the last 24 hours.

MESSAGES now

CabinPulse

Inside temperature back up to 7.4°C. All clear.

Alerts via SMS and email.

What goes wrong with the air in a closed-up building

CO2 climbs with nobody there to notice.

A sealed building has no ventilation and nobody opening doors. CO2 accumulates until someone arrives and wonders why the place feels stale and heavy.

New finishes keep off-gassing.

Fresh paint, sealants, flooring and cabinetry release VOCs for weeks after the work is finished, and concentrations are highest in exactly the still, closed conditions an empty building provides.

Damp and bad air arrive together.

Still, humid air is what mould grows in. Air quality falling and humidity rising is usually one problem being reported two ways.

You only find out on arrival.

Air quality is invisible until you walk in, and by then you are breathing it. The only remedy left is to open everything and wait.

How it compares to a consumer air quality monitor

Consumer air monitors are built for a room somebody is standing in. The question here is a different one: what is the air like in a building nobody has entered for a month?

Indoor air monitorCabinPulse
Tells you when you are awayOnly over WiFiYes, text and email over cellular
Needs internet on siteYesNo
Works in a power cutNoYes, 3 to 4 days on its backup battery
Alert thresholdsApp-only, often fixedYours, and unlimited
Also watchesAir qualityTemperature, humidity, pressure and power too

Most air quality monitors are built for a room you are standing in. This one is for a building you are not.

What it is not

CabinPulse reports the air quality where it sits. It is not a carbon monoxide detector, a smoke alarm or a gas leak detector, and must never be used in place of one. Those are life-safety devices and this is not. It measures CO2, VOCs and overall air quality so you know the state of a building before you walk into it.

Setup in 60 seconds.

As soon as you connect it to power, it starts monitoring.

  1. 1

    Plug it in

    Any outlet, anywhere in the building. Use the included 6ft power adapter and included wall mount.

  2. 2

    It finds its own signal

    Cellular is included and unlimited, on all major networks worldwide.

  3. 3

    Start monitoring

    Set your alerts, add anyone else who should be notified, and view your readings any time.

CabinPulse works anywhere there's coverage via Bell · Telus · Rogers · Vidéotron · SaskTel plus 160+ networks in 80+ countries. Check your coverage

The all-new CabinPulse

$249 once

Plus a plan from $10 a month.

Unlimited data, alerts and the app, included on every plan.

CabinPulse, with its status light on

No WiFi needed

Proudly Canadian

  • Ships from Saskatchewan
  • 30-day risk-free returns
  • 12-month warranty
4.8 from 60+ verified reviews
"After years of worrying about frozen pipes every winter, CabinPulse has been a game-changer for us. The connection works perfectly where our cabin is and the alerts are very reliable and instant!"
Emma Lake, SK
"Setup was very easy. I appreciate the instant alerts and extra long power cord. Using for a vacant property and saves me a lot of time and worry."
Moose Jaw, SK
"Customer service has been excellent when I needed help setting up alerts."
Calgary, AB

Trusted by property owners, organizations and government agencies across Canada

YYC Calgary International AirportRaven Rescue Safety MedicalParks CanadaCanadian Armed ForcesToronto Transit Commission

Frequently asked questions

What is the air quality score?

It combines the CO2 and VOC readings into one indoor air quality (IAQ) score, so you can tell at a glance whether the air in the building is good, moderate or poor.

Can CabinPulse detect wildfire smoke?

It is not a smoke detector. What it can do is show the air quality falling when smoke gets into a closed building, and alert you when it crosses the limit you set.

What are VOCs and why do they matter?

Volatile organic compounds are chemicals that come off paint, cleaning products, building materials and furniture. High levels can cause headaches and irritation. CabinPulse shows you when they build up.

How does air quality monitoring work without WiFi?

CabinPulse has cellular built in and included on every plan. There is no WiFi, internet service or network to set up at the property. Check your area on the coverage page.

What does CabinPulse measure?

Temperature, humidity, air quality (CO2, VOCs and an overall score), air pressure and whether the power is on. It is not a smoke detector, a carbon monoxide alarm or a gas leak detector, and must not be used in place of one.

How are air quality alerts delivered?

By text message and email, to whoever you have added. You set the limits, and an alert goes out when a reading crosses one.

How often does it take a reading?

Every 15 minutes. If you want a reading right now, tap Update Now in the app.

Can I see historical air quality data?

Yes. Every reading is stored and charted by hour, day or month, and you can export the data at any time.

Where is CabinPulse best placed for air monitoring?

Somewhere central, at roughly breathing height, away from a window, a vent or a heat source. Readings reflect the air at the device, not the whole building.

Ready to watch your property?

Ships from Saskatchewan. Cellular, alerts and the app are included on every plan.

Get an air quality monitor
Free shipping from $300 30-day risk-free returns 12-month warranty

Contact Us

Choose how you'd like to reach us