+1 639 638 9919
EN | FR
Proudly Canadian

Your Cart

Home Use cases Cabin & Cottage Monitoring
Use case

CabinPulse watches the temperature, power, humidity and air at your cabin or cottage and texts you when something changes. No WiFi needed.

No WiFi needed

Proudly Canadian

The CabinPulse device, its status light lit

Key features

Everything that can go wrong at an empty cabin.

Temperature, power, humidity and air quality, from one device on one plug. No wiring and no internet needed at the property, just a message when any of it moves outside the range you set.

CabinPulse on the plank wall of a cabin, plugged into the outlet below it, beside an oil lantern

Temperature

Indoor temperature to ±0.2°C, with alerts when it drops or rises past the limits you set.

Power outages

Know within seconds when the power goes out, and again when it comes back.

Humidity

Watch for the damp that turns into mould, mildew and swollen floors over a closed season.

Air quality

CO2 and VOCs, so you know the air is fine before you open the door.

No WiFi needed

Cellular is built in and included on every plan, so CabinPulse works at cabins with no internet at all. Check your area on the coverage page.

Add-ons for the rest of the property

A leak sensor and an environment sensor, $99 each, connect over 2.4 GHz. Range depends on walls and building materials.

Every sensor you need to make sure your property is protected is built right into CabinPulse — nothing to add, wire or install.

Switch CabinPulse on, connect it to power, and monitoring starts instantly.

NewEnable Low Power Mode, and CabinPulse can last up to 24 months without a charge while still sending a daily data update and alerting you to temperature and power changes within a couple of minutes. How it works

Temperature

Get a text as soon as the temperature drops toward freezing, in time to do something before a pipe bursts.

Power

Know the moment the power goes out. It is usually the first sign that something else is about to go wrong.

Humidity

Damp builds into mould and mildew over a season. Catch it while it is still a small job.

Air quality

Tracks CO2, VOCs and overall air quality, so you know when the air has gone bad in a closed-up building.

No WiFi needed.

Cellular is included and unlimited, on all major networks worldwide. Your property needs no internet at all.

It keeps working in a power outage.

Smart thermostats and WiFi sensors go down with the router. CabinPulse has its own connection via cellular, and its backup battery lasts three to four days.

The CabinPulse dashboard showing current temperature, humidity, air quality, pressure and power status, with history charts
Your property's readings and history, in the browser or on your phone.

Check in, anytime.

Every reading is saved, so you can check the full history any time from your phone or computer.

  • Prevent frozen pipes and heating failures
  • Catch water leaks early with a leak sensor
  • Monitor air quality between visits
  • Track humidity to prevent mould
  • Get alerts anywhere in the world
  • Works with no internet at the property

Alerts by text message and email

While you can always check in on the dashboard app, you don't need to. Once your alerts are set up, CabinPulse messages you when something goes wrong.

MESSAGES 14m ago

CabinPulse

Inside temperature 4.1°C and still falling. Power is on.

MAIL 14m ago

Temperature alert — Emma Lake

Now 4.1°C, below your 5°C threshold. Tap to see the last 24 hours.

MESSAGES now

CabinPulse

Inside temperature back up to 7.4°C. All clear.

Alerts via SMS and email.

What actually goes wrong at a cabin nobody is at

The heat fails in February.

A pilot light goes out, a breaker trips, the propane runs dry. The building cools from the inside with nothing to mark the moment it started.

A pipe lets go and runs for weeks.

Water escapes at mains pressure and keeps escaping. Whether that is a plumbing bill or a rebuild comes down to how long it ran before anyone knew.

Damp turns into mould over a season.

No leak, no flood, just a closed building through a humid summer, holding what comes in until the walls and soft furnishings have taken it up.

You find all of it on the first trip of spring.

Every one of these is cheap to deal with on the day it starts and expensive by the time somebody opens the door in May.

How it compares to the usual arrangements

Most cabins are watched one of two ways: somebody nearby agrees to look in, or a smart-home kit is wired to whatever internet the property has.

A neighbour checking inWiFi smart-home kitCabinPulse
Tells you the same dayOnly when they visitWhile the internet holdsYes, over cellular
Works with no internet at the propertyYesNoYes, cellular included
Works in a power cutOnly if they drive outNoYes, 3 to 4 days on its backup battery
Watches temperature, power, damp and airWhatever they happen to noticeA device for eachAll four, one device
History you can look back atNoneCloud, if connectedFull record, exportable

Asking someone to look in works right up until the week they cannot go. The point of monitoring is that the answer stops depending on anybody making the drive.

What it is not

CabinPulse is an unmonitored reporting tool. Nobody watches your readings and nobody is dispatched. It is not a security system, a fire alarm or a carbon monoxide detector, and it cannot heat the building or shut off the water. It tells you what is happening, early enough that you can call somebody who can.

Setup in 60 seconds.

As soon as you connect it to power, it starts monitoring.

  1. 1

    Plug it in

    Any outlet, anywhere in the building. Use the included 6ft power adapter and included wall mount.

  2. 2

    It finds its own signal

    Cellular is included and unlimited, on all major networks worldwide.

  3. 3

    Start monitoring

    Set your alerts, add anyone else who should be notified, and view your readings any time.

CabinPulse works anywhere there's coverage via Bell · Telus · Rogers · Vidéotron · SaskTel plus 160+ networks in 80+ countries. Check your coverage

The all-new CabinPulse

$249 once

Plus a plan from $10 a month.

Unlimited data, alerts and the app, included on every plan.

CabinPulse, with its status light on

No WiFi needed

Proudly Canadian

  • Ships from Saskatchewan
  • 30-day risk-free returns
  • 12-month warranty
4.8 from 60+ verified reviews
"After years of worrying about frozen pipes every winter, CabinPulse has been a game-changer for us. The connection works perfectly where our cabin is and the alerts are very reliable and instant!"
Emma Lake, SK
"Setup was very easy. I appreciate the instant alerts and extra long power cord. Using for a vacant property and saves me a lot of time and worry."
Moose Jaw, SK
"Customer service has been excellent when I needed help setting up alerts."
Calgary, AB

Trusted by property owners, organizations and government agencies across Canada

YYC Calgary International AirportRaven Rescue Safety MedicalParks CanadaCanadian Armed ForcesToronto Transit Commission

Frequently asked questions

Will CabinPulse work at my remote cabin?

If a supported cellular network reaches the cabin, yes. CabinPulse works on major networks worldwide, including Bell, Rogers, Telus, AT&T, T-Mobile and Verizon. Check your area on our coverage page, and if it can't connect where you need it, send it back within 30 days.

What happens if the power goes out?

You get an alert within seconds. CabinPulse keeps working on its backup battery for 3 to 4 days and alerts you again when the power comes back. Turn on Low Power Mode and it lasts up to two years on battery, sending a daily update and still alerting you on temperature limits and power changes within a couple of minutes.

Can I monitor the boathouse or a leak under the sink?

Yes. Add a leak sensor or an environment sensor, $99 each. They connect to CabinPulse over 2.4 GHz, and range depends on walls and building materials.

Can I monitor multiple properties?

Yes. Add a second CabinPulse and both show up in the app. If you are managing many properties for work, our sister product Canaro (canaro.ca) is built for that.

How do I set up CabinPulse?

Plug it into any outlet and activate it in the app. It connects to cellular by itself, with nothing to configure.

What does it cost?

$249 CAD ($199 USD) once for the device, then a plan: $17 a month, $168 a year ($14 a month) or $360 for three years ($10 a month). Plans renew automatically, and every plan includes unlimited data, alerts and the app.

Ready to watch your property?

Ships from Saskatchewan. Cellular, alerts and the app are included on every plan.

Get cabin monitoring
Free shipping from $300 30-day risk-free returns 12-month warranty

Contact Us

Choose how you'd like to reach us