Temperature
Get a text as soon as the temperature drops toward freezing, in time to do something before a pipe bursts.
Use case
Watch humidity from anywhere and get an alert before damp turns into mould, mildew or warped floors. No WiFi needed.
No WiFi needed
Proudly Canadian
Key features
Mould is a slow problem with a cheap early fix.
Damp does not announce itself. It sits above 60% for weeks and turns into mildew on the walls and swelling in the floors. Watching the number is what keeps a season of damage down to an afternoon of work.
Relative humidity
Humidity reported every 15 minutes, so a slow rise shows up long before the musty smell does.
High and low alerts
Set the range that suits your building. You get a text and an email when humidity goes above or below it.
Cellular included
No WiFi or internet required at the property. Check your area on the coverage page.
Trends over a season
Humidity history by hour, day or month shows seasonal patterns and ventilation problems.
Temperature and humidity together
Both on the same chart, so you can see when a cold wall is heading for condensation.
A second room or building
Add an environment sensor ($99) for a basement, crawlspace or boathouse. It connects over 2.4 GHz, and range depends on walls and building materials.
Every sensor you need to make sure your property is protected is built right into CabinPulse — nothing to add, wire or install.
Switch CabinPulse on, connect it to power, and monitoring starts instantly.
NewEnable Low Power Mode, and CabinPulse can last up to 24 months without a charge while still sending a daily data update and alerting you to temperature and power changes within a couple of minutes. How it works
Power
Know the moment the power goes out. It is usually the first sign that something else is about to go wrong.
Humidity
Damp builds into mould and mildew over a season. Catch it while it is still a small job.
Air quality
Tracks CO2, VOCs and overall air quality, so you know when the air has gone bad in a closed-up building.
No WiFi needed.
Cellular is included and unlimited, on all major networks worldwide. Your property needs no internet at all.
It keeps working in a power outage.
Smart thermostats and WiFi sensors go down with the router. CabinPulse has its own connection via cellular, and its backup battery lasts three to four days.
Check in, anytime.
Every reading is saved, so you can check the full history any time from your phone or computer.
- Prevent costly mould and mildew damage
- Check humidity from anywhere in the world
- Set your own high and low limits
- Track humidity trends over time
- Temperature and humidity together
- No WiFi or internet required at your property
Alerts by text message and email
While you can always check in on the dashboard app, you don't need to. Once your alerts are set up, CabinPulse messages you when something goes wrong.
MAIL 14m ago
Temperature alert — Emma Lake
Now 4.1°C, below your 5°C threshold. Tap to see the last 24 hours.
Alerts via SMS and email.
How damp becomes damage
It sits high for weeks before it shows.
Mould needs time more than it needs water. Humidity above roughly 60% for a few weeks is enough, and nothing looks wrong until it very much does.
The season does it, not an event.
There is no leak and no flood. A closed building through a humid August simply holds what comes in, and the wood, plaster and fabric slowly take it up.
Too dry causes damage too.
Through a heated winter humidity can fall far enough to open joints in flooring, crack furniture and shrink trim. Same measurement, other end of the range.
You are reading the wrong room.
Basements and crawlspaces run wetter than the rooms above them, which is exactly where a single reading taken by the door will mislead you.
How it compares to a basic hygrometer
The alternatives are a hygrometer you read when you arrive, or a WiFi sensor that reports for as long as there is internet to report over.
| Hygrometer | WiFi humidity sensor | CabinPulse | |
|---|---|---|---|
| Tells you remotely | No | While the WiFi holds | Yes, text and email over cellular |
| Works in a power cut | Yes, but silently | No | Yes, and it still alerts |
| Needs internet on site | No | Yes | No |
| Alerts both high and low | No | Sometimes | Yes, thresholds you set |
| History | None | Cloud, if connected | Full record, exportable |
A hygrometer on a shelf records the number. It does not tell you the basement sat above 70% for three weeks in August.
What it is not
CabinPulse measures the humidity where it sits. It is not a dehumidifier and changes nothing about the conditions, and it cannot see inside a wall or under a floor. It gives you the number early enough that a season of damage stays an afternoon of work.
Setup in 60 seconds.
As soon as you connect it to power, it starts monitoring.
- 1
Plug it in
Any outlet, anywhere in the building. Use the included 6ft power adapter and included wall mount.
- 2
It finds its own signal
Cellular is included and unlimited, on all major networks worldwide.
- 3
Start monitoring
Set your alerts, add anyone else who should be notified, and view your readings any time.
CabinPulse works anywhere there's coverage via Bell · Telus · Rogers · Vidéotron · SaskTel AT&T · Verizon · T-Mobile · US Cellular · Viaero plus 160+ networks in 80+ countries. Check your coverage
The all-new CabinPulse
$249 once
Plus a plan from $10 a month.
Unlimited data, alerts and the app, included on every plan.
No WiFi needed
Proudly Canadian
- Ships from Saskatchewan
- 30-day risk-free returns
- 12-month warranty
4.8 from 60+ verified reviews
"After years of worrying about frozen pipes every winter, CabinPulse has been a game-changer for us. The connection works perfectly where our cabin is and the alerts are very reliable and instant!"
"Setup was very easy. I appreciate the instant alerts and extra long power cord. Using for a vacant property and saves me a lot of time and worry."
"Customer service has been excellent when I needed help setting up alerts."
Trusted by property owners, organizations and government agencies across Canada
Canadian Armed ForcesToronto Transit Commission Frequently asked questions
What humidity level should I set alerts for?
Most properties should alert when humidity stays above 60% (mould risk) or drops below 30% (wood can crack). Set whatever range suits your building.
Can I monitor humidity in more than one place?
Yes. Add an environment sensor ($99) for a second room or a nearby building, up to 5 add-ons per CabinPulse. Range depends on walls and building materials. If you need to watch many buildings across different sites, our sister product Canaro (canaro.ca) is built for that.
How does humidity monitoring help prevent mould?
Mould grows when humidity stays above about 60%. CabinPulse alerts you when it does, so you can ventilate or run a dehumidifier before mould takes hold.
Does CabinPulse show dew point?
The app shows temperature and humidity side by side, which is what you need to judge condensation risk.
What are ideal and dangerous humidity levels?
Between about 30% and 50% relative humidity suits most buildings. Above 60% for any length of time is where mould and mildew start, and below 20% is dry enough to open joints in wood and flooring.
How will I receive humidity alerts?
By text message and email, to everyone you have added, when a reading crosses a limit you set.
Can CabinPulse detect both high and low humidity?
Yes, and you can set alerts for both. Damp causes mould; very dry air splits trim, flooring and furniture. Both are worth knowing about.
Where should I place CabinPulse for humidity monitoring?
Where damp shows up first, such as a basement, a crawlspace entrance or the coolest outside wall. For a second area, add an environment sensor rather than moving the device.
Ready to watch your property?
Ships from Saskatchewan. Cellular, alerts and the app are included on every plan.
Get a humidity monitor Free shipping from $300 30-day risk-free returns 12-month warranty